YTUNE
Book a session

Black Ops 7 Best PC Settings:
FPS, Input Lag and Packet Burst

The display and quality settings to use, why texture streaming can cause lag spikes, how to read the telemetry overlay, and how to fix the Secure Boot / TPM error.

Verified by Yassine • 5.0 ★ (1,000+ Tuned PCs) • Windows 11 / 10 | Secure Boot + TPM 2.0 required
// QUICK ANSWER

Fullscreen Exclusive, V-Sync off, NVIDIA Reflex On + Boost, and a frame cap you can hold. Let shader preloading finish before you play. Set On-Demand Texture Streaming to its lowest option so the game is not downloading textures mid-match, and keep VRAM use under your card's limit. Many "packet burst" icons come from these local hitches, not from your internet.

Time: 15 minutes•Difficulty: Beginner•Applies to: Call of Duty: Black Ops 7 on PC•Last reviewed: November 2026
// COMPETITIVE SETUP: JUST SET THIS

The competitive setup:

Display Mode
Fullscreen Exclusive
V-Sync (Gameplay and Menus)
Off
NVIDIA Reflex Low Latency
AMD: Radeon Anti-Lag on
On + Boost
Custom Frame Rate Limit
A few FPS below refresh with G-Sync (138 @144 Hz), otherwise what you hold in fights
On-Demand Texture Streaming
Lowest option
VRAM Scale Target
80
Texture Resolution
Normal (Low on 6-8 GB cards)
Upscaling
Off, or DLSS/FSR Quality if you need FPS
Depth of Field, Motion Blur, Film Grain
Off
Telemetry overlay
FPS, latency and packet loss on
// NVIDIA CONTROL PANEL: WORKS FOR EVERY GAME

Right-click the desktop > NVIDIA Control Panel, set these once and click Apply. Leave everything else on default.

Manage 3D settings > Global Settings

Low Latency Mode
Games with NVIDIA Reflex override this automatically
On
Power management mode
Prefer maximum performance
Shader Cache Size
Unlimited
Texture filtering - Quality
High performance
Preferred refresh rate
Highest available
Max Frame Rate
Cap FPS inside the game instead
Off
Image Scaling
Off
Vertical sync
On only if you use G-SYNC
Off
Threaded optimization
Default. Only matters in OpenGL and old DirectX games
Auto
Triple buffering
Default. Only matters in OpenGL games
Off

Manage 3D settings > Program Settings

Your game
A game profile overrides the global settings. Remove anything you did not set, such as Image Sharpening on some EAC games
Nothing forced

Display > Change resolution

Refresh rate
Highest available
Use NVIDIA color settings
Needed to change the options below
Selected
Output color format
RGB
Output dynamic range
Full

Video > Adjust video color settings

How do you make color adjustments
With the NVIDIA settings
Advanced > Dynamic range
Full (0-255)

Optional, only if you use G-SYNC: Display > Set up G-SYNC

Enable G-SYNC, G-SYNC Compatible
Checked
Enable for full screen mode
Selected
Manage 3D settings > Vertical sync
Plus Reflex on and an FPS cap below refresh in the game
On
Manage 3D settings > Monitor Technology
G-SYNC Compatible

Black Ops 7 compiles shaders the first time you launch it and after every driver or game update. Until that finishes, you will see stutter that no setting can fix.

On-Demand Texture Streaming downloads higher quality textures from the internet while you play. On a slow or busy connection, that traffic competes with your game data. Lowering it is the first step when you see lag spikes.

Like Battlefield 6, the PC version uses kernel-level anti-cheat (RICOCHET) that requires Secure Boot and TPM 2.0.

Before you start

  • ✓Update your GPU driver.
  • ✓Wait on the main menu until shader preloading reaches 100%.
  • ✓Close downloads on every device on your network while you test.

Step-by-step

  1. 1.Fix the Secure Boot / TPM 2.0 error first

    The PC anti-cheat requires Secure Boot and TPM 2.0. If either is off, the game will not start, no matter how good your settings are.

    1. Press Win + R, type msinfo32 and press Enter. Check BIOS Mode (it must say UEFI) and Secure Boot State (it must say On).
    2. Press Win + R, type tpm.msc. It should show "The TPM is ready for use" with Specification Version 2.0.
    3. If BIOS Mode says Legacy, your system disk uses MBR. Convert it to GPT first with Microsoft's MBR2GPT tool (command below), then switch the BIOS to UEFI.
    4. In the BIOS: turn CSM off, set Secure Boot to Enabled (Windows UEFI mode, standard keys), and turn on fTPM (AMD) or PTT (Intel) if TPM was missing. Save and restart, then check msinfo32 again.
    mbr2gpt /validate /allowFullOS
mbr2gpt /convert /allowFullOS

    Careful: Back up important files before converting a disk, and suspend BitLocker first if it is on. Only switch the BIOS to UEFI after the conversion succeeds, or Windows will not boot.

  2. 2.Display settings

    1. Display Mode: Fullscreen Exclusive.
    2. Screen Refresh Rate: the highest your monitor supports.
    3. V-Sync (Gameplay and Menus): Off.
    4. NVIDIA Reflex Low Latency: On + Boost. On AMD, use Radeon Anti-Lag.
    5. Custom Frame Rate Limit: set a gameplay cap (see below).

  3. 3.Quality settings

    1. Start from a low preset.
    2. Upscaling: off at 1440p and above if you already have enough FPS. Otherwise DLSS or FSR at Quality.
    3. Texture Resolution: Normal or Low on 8 GB cards, higher only if VRAM allows.
    4. On-Demand Texture Streaming: the lowest option (Off or Minimal, depending on the version).
    5. VRAM Scale Target: around 80. Lower it if the game stutters with VRAM near full.
    6. Turn Depth of Field, World Motion Blur, Weapon Motion Blur and Film Grain off.

  4. 4.Turn on the telemetry overlay

    It tells you whether a hitch is your FPS, your network or the server.

    1. Go to Settings > Interface > Telemetry and turn on FPS, GPU and CPU time, latency (ping) and packet loss.
    2. If FPS dips at the same moment as the packet burst icon, the cause is local (shaders, VRAM, streaming).
    3. If FPS is steady but ping jumps or packet loss rises, the cause is your network or the server. See our ping spikes guide.

  5. 5.Fix stutter after updates

    1. If stutter starts after a driver or game update, use Restart Shaders Pre-Loading in the graphics settings and wait for it to finish.
    2. Do not delete the NVIDIA or AMD shader cache as a "fix". Everything has to compile again, which causes more stutter.

  6. 6.Set a frame cap

    1. With G-Sync or FreeSync: a few frames below refresh (138 at 144 Hz, 224 at 240 Hz).
    2. Without them: a cap your PC holds in busy fights, so the GPU is not stuck at 100%.

Check that it worked

  • ✓Shader preloading shows 100% on the main menu.
  • ✓The telemetry overlay shows stable FPS during fights and no rising packet loss.
  • ✓VRAM use in the overlay stays below your card's total.

What does not work (and why)

✗ Packet burst always means bad internet

Local hitches from shaders, full VRAM or texture streaming often trigger the same icon. Check the telemetry overlay first.

✗ Copying a RendererWorkerCount value from a video fixes stutter

The game sets it automatically for your CPU. A value copied from another PC often causes more stutter. Only change it if you test the result on your own CPU.

✗ Clearing the shader cache before every session helps

It forces a full recompile, which causes stutter until it finishes.

✗ On-Demand Texture Streaming is only about looks

It also downloads data during play, which matters on slow or shared connections.

// WHAT THIS GUIDE DOES NOT COVER

The parts that depend on your exact hardware

Everything above is free and safe on any PC. The parts below depend on your exact CPU, RAM, motherboard and games, so they need live testing. That is what a 1-on-1 YTUNE session covers:

  • ✓RAM timing tuning for steadier 1% lows
  • ✓CPU tuning for your exact chip (X3D, Intel hybrid)
  • ✓Network adapter and router setup to remove real ping spikes

// SOURCES & FURTHER READING

Trusted by 1,000+ competitive players.

Real messages from players after their 1-on-1 AnyDesk session with y1assine.

Book a session
shift_r6 avatar
shift_r6 Discord
★★★★★

"input delay dropped from 12ms to 3ms on my 360hz zowie. mouse feels like it's hardwired directly into my brain now. best $35 ever spent."

Full PC Tuning ($35) Sub-3ms Input Delay
zenith_fivem avatar
zenith_fivem Discord
★★★★★

"fivem custom servers were stuttering constantly in legion square. he tuned memory subtimings and cleaned kernel dpc latency. locked 165 fps now on heavy servers."

Full PC Tuning ($35) +70 FPS in Dense Areas
apex_toran avatar
apex_toran Discord
★★★★★

"tuned my 9800x3d pbo curve and ram subtimings live on anydesk. 0.1% lows doubled and thermals dropped by 8°C. completely risk-free and legit."

Full PC Tuning ($35) 9800X3D + 4090
// 1-ON-1 REMOTE ANYDESK CALIBRATION

Ready for Flat Glass-Smooth Frametimes?

Every system is calibrated live via AnyDesk by Yassine. We strip DPC latency, eliminate micro-stutters, and dial in memory sub-timings. If your system does not feel measurably faster with lower input delay, you receive an immediate 100% refund.

Book Session on Discord (y1assine) $35 Full Tuning • Plans from $20 • 100% Money-Back Guarantee

// FREQUENTLY ASKED QUESTIONS

What are the best Black Ops 7 PC settings?
Fullscreen Exclusive, V-Sync off, Reflex On + Boost, a frame cap, a low preset with textures matched to your VRAM, On-Demand Texture Streaming at its lowest option, and motion blur and depth of field off.
How do I fix packet burst in Black Ops 7?
Turn on the telemetry overlay. If FPS drops when the icon shows, fix the local cause: let shaders finish, lower textures and texture streaming, and keep VRAM below the limit. If FPS is steady, fix the network: use Ethernet and stop background downloads.
Why does Black Ops 7 stutter after an update?
Shaders have to compile again. Use Restart Shaders Pre-Loading and wait until it reaches 100% before playing.
Does Black Ops 7 need Secure Boot?
Yes. The PC version requires Secure Boot and TPM 2.0 for its anti-cheat. Check both in msinfo32 and tpm.msc.

// RELATED OPTIMIZATION GUIDES

Competitive FPS Optimization

Battlefield 6 (BF6)

Best Battlefield 6 PC settings for FPS and low input lag: Future Frame Rendering, NVIDIA Reflex, frame generation, graphics presets, CPU bottlenecks in big matches and the Secure Boot / TPM fix.
Symptom & Stutter Fix

Warzone Packet Burst Fix

Eliminate Warzone and Black Ops 6 packet burst, orange squares, and gunfight micro-stutters with professional 1-on-1 AnyDesk PC tuning by YTUNE for $35.
Network Guide

Ping Spikes and Rubberbanding

How to fix ping spikes, lag spikes and rubberbanding in games: tell FPS spikes from network spikes, test your router with ping, fix Wi-Fi, bufferbloat and background uploads, and find where packet loss starts.
Display Guide

G-Sync, FreeSync and V-Sync

Best G-Sync and FreeSync settings for low input lag: G-Sync + V-Sync in the driver + Reflex + a frame cap below refresh, when to turn V-Sync off, the frame cap formula, and monitor overdrive.